Canon Ixus Manual Mode
Why is my Canon Digital IXUS 95 IS taking pictures in dark conditions the sun, where I draw up?

Usually the pictures are fine, but remains in good daylight conditions, the screen display of the current scene in the shooting mode changes from light to very dark if you tilt the camera up even a little (about 10 degrees). The picture also gets much darker. This means that they sometimes used to get the camera above my head to try to obtain a picture of a tall building, etc Sale as a photo taken as the light is fading (evening), but is taken at noon. Moreover, I find it very difficult take good pictures at night without being too dark or too blurry. Is there a manual for overcoming this problem (in the program so)?

The reason is probably because the scene is brighter in general and its system for the camera was fooled by this leading to dark or underexposed photos. The thing to remember is The camera meters try to average the field, so that is represented as gray, in general, 18% gray. So if there is an extraordinarily brilliant part in the area that the camera is reading then the camera is configured to adjust the exposure to make the area less bright. As we have seen, the area interest is dark. What to do then .. Well, there are some things you can do. One of them is to tilt the first chamber to measure the main area you want display properly. Half press the shutter button to lock exposure and focus, then take the photo. Let's see if it turns out well. Another thing you can do is use a different measurement mode. I personally prefer to use spot or partial metering mode and aim the camera so that the object of interest is in the center of the screen. Once more a means of pressing the shutter button and recompose. For images in the dark if the images are too dark on auto setting then it means that are beyond the photos the camera range. What you can do is adjust the ISO to set it to a higher number. Another option that can test is the adjustment of the bulb. Not sure yet, but has a Ixus 95. If not only then, be creative, put the camera in Shutter Priority or Av and put in the maximum setting of 15 seconds. and see how the pictures come out at night. Of course, you can use a higher ISO, but may be too grainy. Anyway the point is to experiment. Finally, night if your photos were becoming too blurry, then you should use a tripod to steady the camera. Most photos will be blurred if the computer hand below a certain speed which varies from one individual to another, as well as the objective. So again, experiment, and if in doubt, use a tripod.