Canon Powershot Battery Nb 4l
Canon camera battery compatibility confused?

I have a Canon Powershot SD six hundred that uses a lithium ion battery NB-4L. I've been making a Newer models of the 770 SD uses a lithium-ion battery NB-6L in place. Both batteries have the same appearance, but of course has more power to him. Will I be able to use the lithium ion battery NB-6L in my camera of that age or the other way around?

You can call a good camera shop and ask, but I imagine they are not interchangeable. You could fry the camera if it is too powerful. Or call 1-800-OKCanon and learn from them. They know for sure.

Canon Powershot Battery Nb 4l

Canon NB-4L battery?

I get a Canon PowerShot SD1100 and I get a spare battery. It seems that the battery code: Canon NB-4L 760mAh / 3.7V When you buy a generic battery, I am sure that the voltage should remain the same, but if I find a battery that is rated higher mAh, the battery lasts longer? The highest rating damage my camera?

A score higher mAh damaging the camera, but as follows mAh older may have a shorter life. You can void the warranty by using a generic battery. Most rechargeable NiMH batteries lose dependent and must be recharged when not in use after two weeks, but the new formula Duracell 2000mAh NiMH batteries are less than a year when is not used. In addition, batteries 2000mAh seem to have a longer life. Did not like the batteries first, but with 12 more than five years and all still like new. nearest half mAh continue to work well in flashlights, but do not start my camera. The following link refers to aging lithium batteries that can last two to three years, but they are very expensive. A Sony G Series Lithium-ion Battery 960mAh is $ 49.88 at Walmart. Http: / / www.batteryuniversity.com/parttwo-34.htm … A friend asked me to clean and load your new Duracell 2000mAh batteries as described by the last link. These batteries are still very good, after four months of normal use and have not been charged. Camera reports batteries low, but the load is low or bad electrical contacts? Overcharging can ruin good batteries! The secret to a better job of digital cameras is to have good contacts power between the batteries and the camera. Click this link for detailed instructions on cleaning the unit and battery electrical contacts. http://www.google.com/base/a/4210404/D13701973093918363271 Digital cameras require lots of energy. Bad electrical contact can cause many problems for the battery and the contacts of the room must be cleaned properly. The batteries can be fully charged, but the device indicates "low" if the contacts are not really good. Screen LCD is a low steady load, but when lens extension, optical zoom, focus and flash charging are added in the capture mode, the load is too heavy. Bad contacts make cameras do strange things like making bad pictures or off target. CAUTION Do not overload! The batteries can be damaged. Use an automatic two hours or more Energizer Compact smart charger with temperature control, technology trickle-charge, and the safety timer ($ 9.76) at Walmart. Use Duracell 2000mAh preloaded ($ 12.97) or Rayovac ($ 5.97) batteries (both have a charge year) and a full charge cycle. For keep the charge of the battery, use the viewfinder. NiMH batteries must be recharged when the camera reports battery low. The batteries can rejection during the night, but can provide a normal service immediately after being charged. The battery is usable in the rooms can work well pair of flashlights. No batteries or voltage drop below one volt. CAUTION To avoid damaging the memory card, keep the batteries loaded and not delete. Wait until the lights stop blinking then turn the camera before removing the memory. For card readers, double-click Remove the material. Select and then click Stop and click OK. Never touch the ends of the battery or the camera electrical contacts. Oil contacts contaminated fingers. Use stacks of pairs of the same brand and features. Do not mix old and new. New, not do as well as old. Digital Cameras restore the original settings if batteries are removed for about one minute. The time varies depending / Camera. Check the configuration menu for the functions and non-self time. Remove extra memory to eliminate this as a possible problem. Insert fully charged batteries and cleaning and restart the device. The definitive repair for devices that use non-physical software reset by removing the power … VCR / DVD in a month. Click this link for other camera tips and complete instructions on cleaning the camera battery and electrical contacts. http://www.google.com/base/a/4210404/D13701973093918363271

3.70V 780mAh Camera Battery for Canon NB-4L from Dinodirect.com